Screw, Flat Head, TORX, #6-40x.41, Alloy

AB Prototype

$7.99
(3 reviews) Write a Review
SKU:
FHCS_TORX_6-40X.410_ALLOY
Availability:
Usually ships in 1-2 business days
Shipping:
Calculated at Checkout
Caliber:
All Calibers
Adding to cart… The item has been added

Flat Head Socket Head Screw, TORX, 6-40 x .41", Alloy Steel, Qty. 2

These are the CUSTOM screws you need to mount your Trijicon RMR or SRO red dot sight to your OEM SIG P320 slide with the RMR hole-pattern. Can be used for Holosun 507C, but may require trimming. Most current versions of OEM SIG P320 slides come predrilled with the RMR hole pattern, but utilize 6-40 threads (AXG, AXG Scorpion, Legion, X-Series, Pro-Cut & Pro slides).

It may be necessary to TRIM these to length for proper fit for the HOLOSUN 507C and to avoid interference with the extractor spring. Requires T-10 TORX wrench (not included).

Includes: 2 #6-40 X 7/16" flat head, TORX, socket head screws, alloy steel (custom machined to size and length, Approximate overall length of .410-.430").

No other tools or pins are included. Loctite is recommended before installing.

COUNTRY OF ORIGIN: USA (may vary, depending on availability).

Holosun 507C Length screws can be found: HERE

See our quality tools: HERE

3 Reviews Hide Reviews Show Reviews

  • 5
    P320 with Holosun HE507C

    Posted by Brandon Lamb on Mar 24th 2023

    I was having issues with my optic coming loose, the screws that come with the HE507C that do fit, are WAY too short. Confirmed these screws do fit and solved the problem, HOWEVER, on the right side where the spring is underneath, I did have to use a grinder on that one to shorten it like 2-3 threads.

  • 5
    Excellent service and product

    Posted by Lynn Parker on Mar 7th 2023

    The product was exactly what I needed. Worth the extra to buy the custom length screw. Highly recommend

  • 3
    Torx screws for legion227

    Posted by Chris on Feb 28th 2023

    I got my screws and put my Holosun 507c on and it was new never been shot so I loaded up the clips and went to shoot it and my shells wouldn’t go into battery and trying to get the shells out I scratched the top of my barrel and I noticed my ejector was was to hard and it seemed like my externals was locked up so I took it to a gunsmith and the screws was to long and he had to sand the screws down and then it worked fine but to pay that much for screws is fine I just was expecting them to fit especially when Holosun gave me ABslink and I talked to them to be sure to get the right ones and it caused about 3 days of stress . Buy the service was great and the shipping was fast and will use them again I just hope they fix this problem